Laminated Glass

Custom colours, textures and materials laminated between layers of glass available in choice of glass finish and opacity

MG_0299SMG_0468ProductsSunionhallwaylammagilamwall????????????????????????????????????Laminated Glass custom orange Bloomfield Farm, Markdale, OntarioIMG_02801IMG_02981


Imagic Glass laminates using a “cast in place” resin method to bond two (or more) lites of glass. In association with our suppliers, we have formulated proprietary interlayers that meet or exceed all the requirements for safety glass (CPSC 16 CFR 1201,  ANSI Z97.1 and CAN/CGSB 12.1 M90) In addition to strength (if compromised the interlayer will hold the glass together which reduces the safety hazard associated with shattered glass fragments, as well as, to some degree, the security risks associated with easy penetration). The resin also allows us the opportunity to tint any colour and opacity, as well as the ability to laminate textured glass, materials (fabrics, films, mesh, natural fibers and flora). The interlayer also provides a way to apply several other technologies and benefits, such sound dampening, resistance to fire, and ultraviolet filtering.

Additionally Imagic Glass laminates with Ethyl Vinyl Acetate (EVA). EVA laminated glass is fabricated using specially formulated film interlayers that bond the glass using heat and pressure in a specially controlled oven.


Thickness: 6mm – 100mm (1/4” – 4”)
Minimum Size: 100mm x 100mm (4” x 4”)
Maximum Size: 2540mm x 4445mm (100” x 175”)
Colour: Can match any colour within tolerance range (Pantone, Paint Chip, CMYK etc,)
Opacity: Available as clear to opaque (dependent on use of dyes or pigments)
Strength: Available as annealed, heat strengthened or tempered
Minimum Edge: 1/8” clear laminating tape exposed around glass perimeter, use with frame capturing 1/4” minimum of glass edge, arrised (chamfered)
Ground Edge: matte finish with arris (chamfer)
Polished Edge: shiny finish with arris (chamfer)
Safety: CPSC 16 CFR 1201, ANSI Z97.1 and CAN/CGSB 12.1 M90
Interior Installation: No known issues
Exterior Installation: As with all laminated glass, edges must not be exposed to the elements due to possible risk of de-lamination. Minimal fading of colour can be expected over time